Chinese English
  Titanium Anode
  Platinized Anode
  Metal Clad Materials
  Titanium and Titanium Alloy
  Nickel and Nickel Alloy
  Niobium and Niobium Alloy
  Zirconium and Zr Alloy
  Tungsten and Molybdenum
  Lead and Lead Alloy
  Magnesium and Mg Anode
  Aluminum and Al Anode
  Zinc and Zinc Anode
  Graphite Electrode
  Industrial Cable
Tungsten mesh
Release time:2012-5-7 22:44:58  Clicks:14
Tungsten mesh

The Tungsten mesh we produce is made of high quality pure tungsten wire. Pure Tungsten mesh has high melting temperature, sufficient electrical resistance, high modulus of elasticity, low vapor pressure and low thermal expansion combined with good thermal conductivity.

With many years experience in producing tungsten products, we have successfully make out tungsten mesh with pure tungsten wire, and enabled the mesh as good performance as the pure tungsten wire. This tungsten mesh can be used in wide industry fild, like metallurgy, chemical industry etc. The mesh is weaved with high quality tungsten wire in order to ensure the mesh's stability and working life. The thickness of the mesh can be as thin as 0.06mm, mesh density can be as high as 250mesh/inch.

The manufaturing of tungsten wire mesh has two process:

1: Tungsten wire drawing: itis accomplished by coating the wire with a graphite lubricant, heating to a red heat, and then drawing through tungsten carbide or diamond dies. The process is sometimes referred to as hot cold-working, which means that, while the wire is hot, the temperature is still below the recrystallization range. The raw material is qualified with high purity other good metallurgical properties.
2: Tungsten wire mesh weaving: the tungsten wire's diameter can be from 0.03mm to 2.0mm according to customer's requirement, meanwhile, the mesh can be from 0.2mesh/inch to 200mesh/inch. The tungsten wire mesh is finished with high quality, such as precised aperture size, mesh thickness, no defect on mesh surface, etc.

With advanced technology in both weaving mesh and drawing high quality tungsten wire, we are the first factory in China that make out the tungsten wire mesh. The tungsten mesh we produce has been exported to South Korea, America, India, etc.

Tungsten wire mesh Specifications:
Thickness: from 0.06mm to 4.0mm,
Mesh density: from 0.2mesh/inch to 200 mesh/inch.
All meshes will be made according to your specified requirements.
Tungsten Mesh has been presented above, want more similar products, please click Pure Tungsten Mesh,Tungsten Meshes,Tungesten Mesh. 
Our Tungsten Mesh is good in quality and competitive in price. We manufacture Tungsten Mesh and supply OEM, ODM service according to your requirement.
Tel:+86-29-89195306 Fax:+86-29-89195316
Address:No.10,Fengcheng 2nd Road,Weiyang District,Xi'an,China Technical support:network flow